Speed I
Swift drilling trough tough metals
| Work Table | 400 X 300 mm (SS) |
| X Travel | 200 mm |
| Y Travel | 150 mm |
| Z/Z2 Guide Travel | 300 mm/ 150 mm |
| Max Job Height | 310 mm |
| Max Drilling Depth | 300 mm |
Key Features
- Direct drive plunger pump
- Capacity to drill holes from 0.3 mm to 10 mm
- Drills through metals such as copper, carbide, titanium
Machine Tool Specifications
| Electrode Pipe Dia. | 0.3 to 3 mm |
| Max Job Weight | 300 Kg |
| Daylight (With Electrode Holder) | 330 mm |
| Shut Height | 180 mm |
| Throat Min | 310 mm |
| Dielectric Tank | 50 Liters |
| Net Weight | 800 Kg |
| Machine Floor Area | 1100 x 1700 mm |
Pulse Generator Specifications
| Current | 25 A |
| Power | 3 KVA |
| Power Supply | 415V, 3 Phase, 50 Hz |
| On time setting | 10 steps |
| Off time settinng | 10 steps |
| Power Booster (Gap C) | 10 Steps |
Machine Tool
- Two part design
- Low working height
- Balss screw for X,Y and Z axis
- LM Guideways for Z axis
- Rust free, SS Bed
- Open work tray
- Configurable coolant pressure (0 to 100 mpa)
- SS accumulator for deep drilling
- SS tray and cover for X-Y Table
Pulse Generator
- New generation analog controller
- Assured spare availability
- DC stepper motor with belt drive
- Safety interlocks
- Current booster for high speed drilling
Speed II
Swift and deeper drilling through tough metals!
| Work Table | 550 X 350 mm (SS) |
| X Travel | 350 mm |
| Y Travel | 250 mm |
| Z/Z2 Guide Travel | 300 mm/ 150 mm |
| Max Job Height | 310 mm |
| Max Drilling Depth | 300 mm |
Key Features
- Direct drive plunger pump
- Capacity to drill holes from 0.3 mm to 10 mm
- Drills through metals such as copper, carbide, titanium
Machine Tool Specifications
| Electrode Pipe Dia. | 0.3 to 3 mm |
| Max Job Weight | 350 Kg |
| Daylight (With Electrode Holder) | 340 mm |
| Shut Height | 190 mm |
| Throat Min | 380 mm |
| Dielectric Tank | 50 Liters |
| Net Weight | 900 Kg |
| Machine Floor Area | 1200 x 1900 mm |
Pulse Generator Specifications
| Current | 35 A |
| Power | 5 KVA |
| Power Supply | 415V, 3 Phase, 50 Hz |
| On time setting | 10 steps |
| Off time settinng | 10 steps |
| Power Booster (Gap C) | 10 Steps |
Machine Tool
- Two part design
- Low working height
- Balss screw for X,Y and Z axis
- LM Guideways for Z axis
- Rust free, SS Bed
- Open work tray
- Configurable coolant pressure (0 to 100 mpa)
- SS accumulator for deep drilling
- SS tray and cover for X-Y Table
Pulse Generator
- New generation analog controller
- Assured spare availability
- DC stepper motor with belt drive
- Safety interlocks
- Current booster for high speed drilling
Speed - VII (F Type)
Swift drilling trough tough metals
| Work Table | 800 X 500 mm (SS) |
| X Travel | 800 mm |
| Y Travel | 500 mm |
| Z/Z2 Guide Travel | 300mm + Back Travel: 150mm |
| Max Job Height | 325 mm |
| Fine Movements for X & Y axis range | 3 Steps: 0.005, 0.01 & 0.05mm |
| Component weight | 2000 kgs |
| Electrode Size | 0.3mm to 3.0mm |
EDM Spark Erosion Machine Maintenance Checklist
Start-up Check List for your Sparkonix Machine after the Corona Lockdown Welcome back to machining! But, read this before you restart the Machines! Performance and reliability are at the core of Sparkonix’s Machines. A ‘restart’ after a long gap is a critical juncture for your factory. If the machines are pressed into operations without some […]
Download Brochure
