| High
Speed Disintegrator Micro Drill |
|
Sparkonix(India),
after years of dedicated research and development now present a fully
indigenously designed machine for deep drilling and fine hole drilling
operations.
The Disintegrator Micro Drill 'DSH-II' has in built capability of drilling
fine holes from 0.3 mm to 3.0 mm upto depths of 200 mm
The electrodes suitable for drilling fine holes are tubular brass
electrode available from OD of 0.3 mm to 3.0 mm in steps of 0.1 mm.
Fine holes, small holes and deep drilled holes are required to be drilled
in a variety of applications like start holes for wire-cut EDM. gas escape
holes in dies for plastic moulds and for drilling in hard metals. |
| DSH
II |
DSH
III |
Applications:
|
 |
 |
High speed Disintegrators Micro Drill for high performance, high
quality, low cost, small hole deep drilling capability.
 to make
'start holes' for wire-cut EDM
for making
'gas escape holes' in dies for plastic moulds
for
drilling small holes in hard metals, tungsten carbide, super hard tungsten
materials, super hard alloys and powder metallurgical steels.
can work
on spherical, curved and tapered workpieces |
|
High Speed Disintegrator Micro Drill for high performance, high
quality, low cost, small hole deep drilling capacity. |
High Speed Disintegrator Micro Drill for high performance, high
quality, low cost, small hole deep drilling capacity. |
|
|
|
SPECIFICATIONS |
|
MACHINE
UNIT |
|
Work Table Size (L x
W)
|
395 x 295 mm
|
| Max.
Workpiece Size (L x W x H) |
150
x 150 x 200 mm |
| Max.
Workpiece Weight |
50
Kgs. |
| Table
travel (X,Y) |
150
x 150 mm |
| Electrode
Movement (Z1) |
200
mm |
| Guide
Movement (Z2) |
80
mm |
| Electrode
Pipe Diameter |
0.3
- 3.0 mm in steps of 0.1 mm
3.0mm to 8.0 mm in steps of 1.0mm |
| Max.
Electrode Pipe Length |
400
mm |
| Distance
from table to bottom guide holder |
130
mm |
| Machining
Fluid |
Distilled
Water |
| Outside
Dimensions |
875
x 765 x 2000 mm |
| Net
Weight |
850
Kgs. |
| Fluid
Capacity |
25
Ltrs. |
| |
|
| POWER
SUPPLY UNIT |
| Input
Power Source |
3
KVA |
| Pulse
generation System |
MOSFET
Switching |
| Max.
Machining Current |
25
Amps |
| On
Time Setting |
10
Steps |
| Off
Time Setting |
10
Steps |
| |
|
| Note:
The above specifications are subject to change without notice in view of
our Policy of progressive development |
|
|
|
|
Metal
Tungusten Carbide 10mm
Electrode Copper Ø 0.2 to Ø 3.0mm |
|
|
|
Metal SKD11
40mm
Electrode Brass Ø 0.3 to Ø 3.0mm |
|
|
|
Metal SKD11
10mm
Electrode Brass Ø 0.3 to Ø 3.0mm |
|
